Subscribe:
RSS feed
OPTICAL IMAGING TECHNOLOGIES
Discover the new ITALA cameras with polarized sensors
ITALA G series now features 4 new ITALA® camera models integrating Sony Polarsens™ sensors with 5 MP and 12 MP resolutions (ITAxx-GC-1xC-PL models). These new sensors feature a multidirectional polarizer that, in addition to brightness and color data, captures information about the light polarization itself.
Posted in: News
Nearly zero distortion Opto Engineering macro lenses for sensors up to 1.1”
January 18, 2024
by optoengineering-blog
Opto Engineering expands its range of macro lenses by introducing the new MC3M series for sensors up to 1.1″. The MC3M series is designed to capture images of small objects with excellent resolution and nearly zero distortion at a fixed working distance.
Posted in: News
End of the year event 2023
December 21, 2023
by optoengineering-blog
Opto Engineering celebrated the end of the year with an internal event in an excellent location, in theme with the corporate gifts that were delivered to all participants: the Winter Garden at the Crowne Plaza in Verona.
Posted in: News
Agire i Valori
December 1, 2023
by optoengineering-blog
In 2023 we initiated a very deliberate and reasoned project dedicated to Corporate Values. In fact, after presenting the new values during a major company-wide event in September 2022, the need arose to explain how to act out the values in a practical way, in everyday business life.
Posted in: News
Visione artificiale all’IS Fermi di Mantova
October 24, 2023
by optoengineering-blog
Nei prossimi mesi Opto Engineering guiderà un gruppo di studenti dell’Istituto Superiore Enrico Fermi di Mantova nella progettazione e realizzazione di componenti di visione artificiale.
Posted in: News
Bike to Work Day 2023
September 29, 2023
by optoengineering-blog
Oggi, con una settimana di ritardo a causa del maltempo, Opto Engineering ha aderito alla Giornata Europea dedicata al Bike to Work Day.
Posted in: News
EXE Training classes – Now online the new calendar
July 21, 2023
by optoengineering-blog
The new calendar of FREE TRAINING COURSES is online: secure your place now!
Posted in: EXE
ITALA G.EL, the industrial PoE GigE Vision cameras made in Italy with integrated liquid lens control
July 11, 2023
by optoengineering-blog
ITALA G.EL series integrates high-quality Sony Pregius and Pregius S CMOS sensors such as the most commonly used 2nd generation sensors with 3.45 µm pixels and the latest IV generation with 2.74 µm pixels.
Posted in: News
Opto Engineering Germany celebrates its 10th years anniversary
July 4, 2023
by optoengineering-blog
We would like to thank all the customers that joined us at Harlachinger Jagdschlössl on 28 June to celebrate with us the 10th anniversary of Opto Engineering Germany.
Posted in: News
Opto Engineering’s products at Korea Vision Show – March 8-10, 2023
March 2, 2023
by optoengineering-blog
Opto Engineering invites you to the Smart Factory + Automation World 2023, 8 – 10 March 2023 at COEX Seoul.
Posted in: News
Discover Opto Engineering new high resolution telecentric lenses
February 16, 2023
by optoengineering-blog
Opto Engineering introduced the new TC4MHRP and TC4MHRP CORE series models featuring larger optical aperture and therefore higher resolution.
Posted in: News
Opto Engineering at Vision Stuttgart, Booth 8D48
September 30, 2022
by optoengineering-blog
Opto Engineering is delighted and excited to introduce ITALA, the new industrial GigE Vision POE cameras designed and manufactured in Italy.
Posted in: News
New telecentric lenses for sensors up to 1”
June 15, 2022
by optoengineering-blog
Discover our new TC2MHRP and TC2MHRP CORE high resolution telecentric lenses for sensors up to 1”.
Posted in: News
TCLIB Suite – unmatched measurement repeatability on your telecentric setup
June 9, 2022
by optoengineering-blog
We present TCLIB SUITE, a user-friendly software library which will help you to make the most out of your system
Posted in: News
Order now the biggest telecentric lenses and lights ever made by Opto Engineering
May 31, 2022
by optoengineering-blog
Measuring big components is anything but easy and we at Opto Engineering are perfectly aware of this. That’s why, thanks to our 20 years’ experience in the world of machine vision, we developed the biggest telecentric lenses and illuminators ever made by Opto Engineering specifically designed to measure big components.
Posted in: News
Introducing PCCD2M, the new catadioptric lens for 360° top and lateral view
May 17, 2022
by optoengineering-blog
An all-round inspection that avoids part rotation or multi-camera systems is a must for many machine vision applications in a variety of industries.
Posted in: News
Vieni a trovarci a SPS ITALIA
May 11, 2022
by optoengineering-blog
Siamo felici di rivedere presto i nostri clienti, partner e amici ad SPS Italia, la fiera per l’industria intelligente, digitale e flessibile, riconosciuta come punto di riferimento per il comparto manifatturiero italiano.
Posted in: News
Control is back and we are ready to see you!
April 22, 2022
by optoengineering-blog
We hope to meet you in person at our Booth 6222 during CONTROL in Stuttgart from 3 to 6 May.
Posted in: News
Opto Engineering’s products at Korea Vision Show
March 31, 2022
by optoengineering-blog
Opto Engineering invites you to the Korea Vision Show, 6-8 April 2022 at COEX Seoul.
Posted in: News
Opto Engineering PCMP Series recognized with Top Innovation 2022 award by inVISION
January 20, 2022
by optoengineering-blog
We are glad to announce that our PCMP Series was selected by a jury of experts as one of the ten most innovative products and received the inVISION Top Innovation 2022 award.
Posted in: News
End of the Year Event 2021
December 23, 2021
by optoengineeringblog
On December 17th at Villa Cavriani (Mantua) took place the Opto Engineering End of the Year Dinner in the name of fun and celebrations of those who have achieved important business milestones: 5, 10, 15 years with Opto Engineering … Waiting to celebrate together our 20y anniversary, 2002 – 2022.We could not miss an energetic […]
Posted in: News
Happy Holidays! Discover Italy with Opto Engineering!
December 22, 2021
by optoengineering-blog
We are very excited to announce today Opto Engineering’s new game release for all machine vision gamer fans.
Posted in: News
Thank you all for choosing Opto Engineering again!
December 7, 2021
by optoengineering-blog
We are very grateful to you for choosing Opto Engineering every day for the past 20 years.
Posted in: News
Lighting and Telecentric Optics Kits for your machine vision lab
December 1, 2021
by optoengineering-blog
OE kits are the perfect solution for everyone dealing with machine vision applications that require testing with different types of lights and optics.
Posted in: News
Telecentric lenses for the inspection of microplates
November 25, 2021
by optoengineering-blog
Telecentric lenses are the perfect solution for the inspection of microplates, widely employed in the life science and biomedical industries.
Posted in: News
Led Line light 50 mm – LTNC series
September 2, 2021
by optoengineering-blog
Opto Engineering LTLNC series are LED line illuminators designed for line scan application.
Posted in: News
Syringe & needle inspection
August 25, 2021
by optoengineering-blog
Syringes are inspected at a full 360° to check for possible incorrect cap placements or bent needles. TC CAGE lenses allow to obtain four orthonormal views in a single image that is then processed by a dedicated vision software.
Posted in: News
FabImage software: discover the power of the new Deep Learning
August 6, 2021
by optoengineering-blog
Software technology is constantly improving and Opto Engineering is at leading edge of innovation. The new version of FabImage machine vision software is now available with the revolutionary Deep Learning tools.
Posted in: News
Register for our presentation at Vision Spectra Conference
July 14, 2021
by optoengineering-blog
Opto Engineering will take part in the Vision Spectra Conference, 20-22 July 2021, with a presentation about Integrating Telecentric Optics for Machine Vision presented by Mr Gaetano Panagia, Technical support manager USA.
Posted in: News
Telecentric lenses for the inspection of stators in electric engines
June 26, 2021
by optoengineering-blog
The application consists in the top-down inspection of the stator to perform an accurate measurement of the distances between the various parts and to search for any defects in the winding process of copper wires around the iron cores.
Posted in: News
360° label inspection on pharmaceutical bottles
June 10, 2021
by optoengineering-blog
The inspection required performing OCR to read the reference code, control or lot number on the label for Track and Trace purposes and also verify that the label was applied correctly on the bottle.
Posted in: News
Discover the advantages of special lenses for top and side inspection vs multi-camera systems
May 18, 2021
by optoengineering-blog
Many machine vision applications such as OCR/barcode reading on bottles and containers, or defect detection inside threaded bores require inspecting features randomly located both on the part outer or inner sides, and on the top and bottom surfaces.
Posted in: News
New collimated LED backlights
March 19, 2021
by optoengineering-blog
We have expanded our range of LED backlights from LT2BC and LTBP series by adding models featuring a special collimation film. The new collimated models are the ideal choice for measurement applications or for the inspection of subtle scratches/dents on transparent surfaces in confined spaces.
Posted in: News
Schedule a meeting at Vision China Shanghai, 17-19 March 202
March 15, 2021
by optoengineering-blog
Come to our booth 1512 – Hall W1, and discover our new optics with liquid lenses technology and many more outstanding machine vision components.
Posted in: News
Do you need a Custom Camera?
March 3, 2021
by optoengineering-blog
With almost twenty years of experience in the world of machine vision Opto Engineering now offers you custom industrial cameras specifically designed to meet yours requirements.
Posted in: News
New Opto Engineering website®
February 12, 2021
by optoengineering-blog
You’re invited to join our webinar dedicated to the Opto Engineering® news! We have re-organized our product portfolio to help you find easier and faster what you may need to solve your applications.
Posted in: News
UVGATE funziona: Opto Engineering® lo prova!
February 9, 2021
by optoengineering-blog
UVGATE funziona e ora siamo alla ricerca di aziende, enti pubblici e privati disponibili a sperimentare in situ questa tecnologia ed intraprendere una collaborazione a lungo termine per la distribuzione a livello nazionale e internazionale.
Posted in: News
EXE online training: FabImage software course
January 29, 2021
by optoengineering-blog
In this half-day training course, you’ll learn the basics of FabImage, how to put together basic but yet 100% functioning machine vision applications. The course will be taught by Gaetano Panagia, technical support specialist of Opto Engineering.
Posted in: News
The new Opto Engineering® product portfolio is officially online!
January 28, 2021
by optoengineering-blog
You’re invited to join our webinar dedicated to the Opto Engineering® news! We have re-organized our product portfolio to help you find easier and faster what you may need to solve your applications.
Posted in: News
Opto Engineering USA has a new Sales Director
January 22, 2021
by optoengineering-blog
Today, Opto Engineering® is happy to announce that Mr Alex Bai has been appointed as the Sales Director for the Americas. We wish Alex all the best in his new role and given his experience, we are confident in his ability to do a great job leading the USA Opto Engineering Sales Team.
Posted in: News
EXE online training: Horus Software course
January 21, 2021
by optoengineering-blog
In this training you’ll get to know its ease of use and flexibility, the built-in communication with external devices (camera, strobe controller, motor controller), the possibility of customization of graphics, algorithms, and IT structures interfacing (SCADA, DBs…) and how all this makes Horus the best option for metrology machines and applications.
Posted in: News
EXE online training: Optics and Illumination training class
January 15, 2021
by optoengineering-blog
In this basic course you will learn how to select the correct components and how to extend the service life of your illumination, helping you to decrease operational costs. The course will be taught by Davide Soresina, technical support specialist of Opto Engineering®.
Posted in: News
Happy Holidays from Opto Engineering!
December 17, 2020
by optoengineering-blog
In this year of digital connections, we have missed you. Not meeting you face-to-face during exhibitions or at Opto Engineering events has created an emotional void. If you have missed us too, let us hear from you.
Posted in: News
We are hiring, you can be our next Sales Representative in the US
December 4, 2020
by optoengineering-blog
Opto Engineering United States is currently looking for a Sales Representative.
Posted in: News
We are hiring, you can be our next Sales Representative in Germany
December 4, 2020
by optoengineering-blog
Opto Engineering Deutschland GmbH is currently looking for a Sales Representative.
Posted in: News
EXE online training: Horus Software course
November 13, 2020
by optoengineering-blog
In this training you’ll get to know its ease of use and flexibility, the built-in communication with external devices (camera, strobe controller, motor controller), the possibility of customization of graphics, algorithms, and IT structures interfacing (SCADA, DBs…) and how all this makes Horus the best option for metrology machines and applications.
Posted in: News
EXE online training: Optics and Illumination course
November 12, 2020
by optoengineering-blog
In this basic course you will learn how to select the correct components and how to extend the service life of your illumination, helping you to decrease operational costs. The course will be taught by Davide Soresina, technical support specialist of Opto Engineering®.
Posted in: News
Join us for the International Vision Solutions Conference
November 5, 2020
by optoengineering-blog
We are pleased to announce that Opto Engineering® will join the International Vision Solution Conference, a two-day online conference, where you will have the opportunity to speak with our Tech Support Specialists and our Area Managers about any new applications or projects you have in mind.
Posted in: News
EXE Online Training: FabImage Software Course
November 3, 2020
by optoengineering-blog
In this half-day training course, you’ll learn the basics of FabImage, how to put together basic but yet 100% functioning machine vision applications. The course will be taught by Gaetano Panagia, technical support specialist of Opto Engineering.
Posted in: News
Impegno e Ottimismo: Filippo ora è nel team Opto
October 31, 2020
by optoengineering-blog
Quale finale migliore per una storia così bella? Ieri, venerdì 30 Ottobre 2020, l’azienda Opto Engineering, rappresentata da Hilenja De Lillo e Daniele Badalotti, ha firmato un patto di fiducia con Filippo Molani: un contratto a tempo indeterminato, una tappa importante per lui e per il suo percorso di autonomia ma anche per noi ai […]
Posted in: News
Opto Engineering® 
February 8, 2024
by optoengineering-blog
0